Dyeing on textile substrates such as cotton, silk and polyester was carried out by the conventional method. Dyeing was carried out in open dye bath. Cotton fabric was dyed with reactive dyes (Reactive Blue 4, Reactive Orange 4, Reactive Violet 5), direct dyes (Direct Red 7, Direct Black 22, Direct Blue 1) and vat dyes (Vat Yellow 2, Vat Red 10, Vat Brown 1). Silk fabric was dyed with acid dyes (Acid Yellow 17, Acid Orange 7, Acid Red 73). Polyester fabric was dyed with disperse dyes (Disperse Orange 3, Disperse Orange 13, Disperse Red 11). In another method and in order to produce color on conductive fabric by a greener route (non use of auxiliaries and heat), fresh textile substrates were subjected to chemical polymerization with pyrrole in the presence of dye at room temperature. The effects of surfactants (sodium dodecyl sulphate, Cetyl trimethylammonium bromide) and dopants (n-tetrabutylammonium tetrafluoroborate, 1-butyl-3-methylimidazolium tetrafluoroborate) in the polymerization were studied. The polymerized fabric containing the dye was then measured using Computer Color Matching (CCM) analysis to assess the dye uptake. Crease recovery angle of the fabrics was measured. Electrical conductivity of conductive fabrics was measured by electrochemical impedance spectroscopy. Surface morphology was tested with Scanning Electron Microscope.